Residential plumbing
What we investigate and repair
Every call starts with a problem. Our work is to follow the clues, identify the cause, and complete the repair.
01Water heaters
Leaking tanks, failing components, aging units, and heaters that no longer deliver the hot water your home needs.
02Hidden leaks
Water can travel away from its source before it becomes visible. We investigate the signs and trace the leak back to where the case began.
03Water service
The line connecting the meter to your home can fail, leak, or restrict flow. We investigate the service line when the evidence points beyond the fixtures.
04Water pressure
High or low water pressure is a clue, not always the cause. We trace the pressure problem back to its source.
05Repiping
Sometimes the problem is not one fixture or one connection. When the piping itself has become the issue, we investigate the condition of the system and determine the appropriate path forward.
06Valves
A valve that leaks, sticks, or fails to shut off can create a larger plumbing problem. We identify the failure and address the source.
07Drains
Slow drains and recurring backups leave clues. We investigate what is affecting the drainage system rather than simply treating the symptom.
08Tankless systems
Scale, fault codes, poor performance, and systems that stop delivering reliable hot water can all point to an underlying issue.
09Gas piping
New gas lines, corrections, and related plumbing work completed according to the requirements of the job.
10Code corrections
When existing plumbing does not meet current requirements, we identify what needs to be corrected and bring the affected work up to code.
11Unusual problems
Not every plumbing problem follows a familiar pattern. When the symptoms do not match a standard failure, we investigate the case from the evidence up.
12Water heater repair & replacement
When a tank leaks, fails to heat, or ages past reliable service, we diagnose the unit and repair or replace it correctly.
13Gas water heaters
Gas-fired tanks that will not light, vent correctly, or deliver steady hot water need a focused investigation of combustion and plumbing.
14Electric water heaters
Element failures, thermostat issues, and tank leaks leave clear clues. We trace the failure and restore electric hot water service.
15Heat-pump / hybrid water heaters
Hybrid units that underperform, fault, or freeze up need diagnosis of both the plumbing connections and the heat-pump system.
16Water heater maintenance & flushing
Sediment, scale, and neglected anodes shorten tank life. Scheduled flushing and maintenance keep the unit working longer.
17Hot-water recirculation systems
Long waits for hot water point to recirculation pumps, timers, sensors, or loop design that need investigation.
18Thermostatic / tempering valves
Mixing valves that fail to temper water correctly create scald risk or lukewarm delivery. We identify and correct the failure.
19Expansion tanks
Water hammer, relief-valve discharge, and pressure spikes often point to a failed or missing thermal expansion tank.
20Whole-house repiping
When leaks and failures keep appearing throughout the home, the piping system itself becomes the case — not one fixture at a time.
21PEX-A repiping
PEX-A repiping replaces failing distribution lines with flexible, durable piping suited to modern residential systems.
22Copper pipe repair & replacement
Pinholes, green corrosion, and failed solder joints call for targeted copper repair or section replacement.
23Galvanized pipe replacement
Galvanized steel restricts flow and corrodes from the inside. When the evidence points to galvanized, replacement is often the lasting fix.
24Water service repair
Leaks or damage on the line between the meter and the home can often be repaired when the failure is localized and the pipe is otherwise sound.
25Water service replacement
When the service line is too far gone for a reliable repair, full replacement restores pressure and stops ongoing loss.
26Main water shutoff replacement
A main shutoff that leaks, seizes, or will not close fully is a critical failure — we replace it so you can control the system.
27Pressure-reducing valves (PRVs)
High municipal pressure or a failed PRV can damage fixtures and appliances. We diagnose and correct pressure regulation.
28Water-pressure diagnosis & repair
High or low pressure is a clue. We measure, isolate, and repair the cause — regulator, restriction, or supply condition.
29Leak detection & plumbing diagnostics
When water loss or damage has no obvious source, we investigate systematically until the leak or failure is identified.
30Water-line leak repair
Supply-line leaks behind walls, under slabs, or in crawl spaces are traced and repaired at the failed section.
31Emergency plumbing repairs
Active leaks, burst lines, and sudden failures need fast isolation and repair. We open the urgent case and stop the damage.
32Toilet installation & replacement
Leaking bases, cracked bowls, and outdated toilets are replaced and set correctly so the fixture seals and flushes reliably.
33Toilet repair
Running toilets, weak flushes, and fill-valve failures are diagnosed and repaired without replacing the whole fixture when the evidence allows.
34Bidet installation
Bidet seats and attachments need correct water supply, isolation, and mounting. We install them cleanly and to code expectations.
35Faucet installation & replacement
Dripping, seized, or outdated faucets are replaced with correct deck fittings, supply lines, and shutoffs.
36Kitchen plumbing
Sinks, supply lines, disposals, dishwashers, and related kitchen connections investigated and repaired as one system.
37Bathroom plumbing
Toilets, lavatories, showers, and tubs share supply and drain systems. We diagnose bathroom failures and close the case correctly.
38Shower valve installation & replacement
Failed shower valves cause leaks, scald risk, and no control. We replace cartridges or full valves behind the wall when needed.
39Tub / shower plumbing
Tub and shower supply, drains, overflows, and valves form one case file when leaks or performance problems appear.
40Laundry plumbing
Washer boxes, standpipes, and laundry supply lines fail in ways that flood quickly. We investigate and correct laundry plumbing.
41Laundry boxes & drain pans
Outdated laundry boxes and missing drain pans leave washers unprotected. We install or replace them for safer laundry setups.
42Utility-sink installation
Utility sinks need proper supply, trap, and drain routing. We install them for garages, basements, and laundry rooms.
43Dishwasher installation & plumbing
Dishwashers need correct supply, drain high-loop or air gap, and leak-free connections. We handle the plumbing side of the install.
44Garbage disposal installation & replacement
Humming, leaking, or seized disposals are replaced and wired into the drain assembly correctly.
45Angle-stop replacement
Under-sink and toilet shutoffs that drip or seize are replaced so you can isolate fixtures without drama.
46Fixture supply-line replacement
Aged braided or soft-copper supply lines fail without much warning. We replace them before or after they leak.
47Drain repair & replacement
Failed traps, corroded drain arms, and broken waste lines are repaired or replaced so fixtures drain without leaks.
48Drain cleaning
Slow drains and backups leave clues. We clear the line and investigate what keeps returning after a temporary fix.
49Sewer / drain camera inspections
When the cause is underground or inside the line, a camera inspection shows the evidence — offsets, roots, scale, or collapse.
50Hydro jetting
Grease, scale, and heavy buildup often need high-pressure water jetting beyond a standard cable clear.
51Waste and vent piping
Improper waste or vent piping causes slow drains, gurgling, and sewer odors. We correct the drainage and venting path.
52Plumbing vent alterations
Roof vent moves, island vents, and remodel-driven vent changes must be designed so the drainage system still breathes correctly.
53Plumbing remodels
Full plumbing remodels need rough-in planning, fixture coordination, and finishes that close cleanly. We handle the plumbing file end to end.
54Kitchen remodel plumbing
Island sinks, dishwasher moves, pot fillers, and new layouts need kitchen remodel plumbing planned before cabinets close.
55Bathroom remodel plumbing
Moved toilets, new showers, and double vanities require bathroom remodel plumbing that is laid out and finished correctly.
56Natural-gas line installation & repair
New gas runs and repairs to existing lines are sized, routed, and tested to meet the load and the jurisdiction’s requirements.
57Gas appliance connections
Water heaters, dryers, ranges, and other gas appliances need correct connectors, shutoffs, and leak-tested connections.
58Cooktop / range gas connections
Cooktops and ranges need properly sized gas supply, shutoff access, and a clean connection inside the cabinet or behind the unit.
59Hydronic heating plumbing
Boilers and hydronic loops depend on correct piping, pumps, and valves. We investigate and repair the plumbing side of hydronic heat.
60Radiant-floor heating plumbing
Radiant manifolds, loops, and supply piping need careful diagnosis when floors stay cold or loops leak.
61Boiler-related plumbing
Near-boiler piping, feeds, relief valves, and closely related connections are investigated when the hydronic plant misbehaves.
62Backflow / DCVA installation & replacement
Backflow preventers and DCVAs protect the potable supply. We install, replace, and support testing requirements for these devices.
63Plumbing inspections & troubleshooting
When something feels wrong but the cause is unclear, we inspect the system, gather evidence, and explain what we find.
64Permit-related plumbing work
When permits and inspections are part of the job, we complete the plumbing scope so the work is ready for the inspector.
Not sure which file your problem belongs in? Tell us what you are seeing — we will open the case.
Request Service