Private I Plumbing

Water heaters

Leaking tanks, failing components, aging units, and heaters that no longer deliver the hot water your home needs.

Hidden leaks

Water can travel away from its source before it becomes visible. We investigate the signs and trace the leak back to where the case began.

Water service

The line connecting the meter to your home can fail, leak, or restrict flow. We investigate the service line when the evidence points beyond the fixtures.

Water pressure

High or low water pressure is a clue, not always the cause. We trace the pressure problem back to its source.

The Case of the Disappearing Water Pressure

Repiping

Sometimes the problem is not one fixture or one connection. When the piping itself has become the issue, we investigate the condition of the system and determine the appropriate path forward.

Valves

A valve that leaks, sticks, or fails to shut off can create a larger plumbing problem. We identify the failure and address the source.

Drains

Slow drains and recurring backups leave clues. We investigate what is affecting the drainage system rather than simply treating the symptom.

Tankless systems

Scale, fault codes, poor performance, and systems that stop delivering reliable hot water can all point to an underlying issue.

Gas piping

New gas lines, corrections, and related plumbing work completed according to the requirements of the job.

Code corrections

When existing plumbing does not meet current requirements, we identify what needs to be corrected and bring the affected work up to code.

Unusual problems

Not every plumbing problem follows a familiar pattern. When the symptoms do not match a standard failure, we investigate the case from the evidence up.

Water heater repair & replacement

When a tank leaks, fails to heat, or ages past reliable service, we diagnose the unit and repair or replace it correctly.

Gas water heaters

Gas-fired tanks that will not light, vent correctly, or deliver steady hot water need a focused investigation of combustion and plumbing.

Electric water heaters

Element failures, thermostat issues, and tank leaks leave clear clues. We trace the failure and restore electric hot water service.

Heat-pump / hybrid water heaters

Hybrid units that underperform, fault, or freeze up need diagnosis of both the plumbing connections and the heat-pump system.

Water heater maintenance & flushing

Sediment, scale, and neglected anodes shorten tank life. Scheduled flushing and maintenance keep the unit working longer.

Hot-water recirculation systems

Long waits for hot water point to recirculation pumps, timers, sensors, or loop design that need investigation.

Thermostatic / tempering valves

Mixing valves that fail to temper water correctly create scald risk or lukewarm delivery. We identify and correct the failure.

Expansion tanks

Water hammer, relief-valve discharge, and pressure spikes often point to a failed or missing thermal expansion tank.

Whole-house repiping

When leaks and failures keep appearing throughout the home, the piping system itself becomes the case — not one fixture at a time.

PEX-A repiping

PEX-A repiping replaces failing distribution lines with flexible, durable piping suited to modern residential systems.

Copper pipe repair & replacement

Pinholes, green corrosion, and failed solder joints call for targeted copper repair or section replacement.

Galvanized pipe replacement

Galvanized steel restricts flow and corrodes from the inside. When the evidence points to galvanized, replacement is often the lasting fix.

Water service repair

Leaks or damage on the line between the meter and the home can often be repaired when the failure is localized and the pipe is otherwise sound.

Water service replacement

When the service line is too far gone for a reliable repair, full replacement restores pressure and stops ongoing loss.

Main water shutoff replacement

A main shutoff that leaks, seizes, or will not close fully is a critical failure — we replace it so you can control the system.

Pressure-reducing valves (PRVs)

High municipal pressure or a failed PRV can damage fixtures and appliances. We diagnose and correct pressure regulation.

Water-pressure diagnosis & repair

High or low pressure is a clue. We measure, isolate, and repair the cause — regulator, restriction, or supply condition.

The Case of the Disappearing Water Pressure

Leak detection & plumbing diagnostics

When water loss or damage has no obvious source, we investigate systematically until the leak or failure is identified.

Water-line leak repair

Supply-line leaks behind walls, under slabs, or in crawl spaces are traced and repaired at the failed section.

Emergency plumbing repairs

Active leaks, burst lines, and sudden failures need fast isolation and repair. We open the urgent case and stop the damage.

Toilet installation & replacement

Leaking bases, cracked bowls, and outdated toilets are replaced and set correctly so the fixture seals and flushes reliably.

Toilet repair

Running toilets, weak flushes, and fill-valve failures are diagnosed and repaired without replacing the whole fixture when the evidence allows.

Bidet installation

Bidet seats and attachments need correct water supply, isolation, and mounting. We install them cleanly and to code expectations.

Faucet installation & replacement

Dripping, seized, or outdated faucets are replaced with correct deck fittings, supply lines, and shutoffs.

Kitchen plumbing

Sinks, supply lines, disposals, dishwashers, and related kitchen connections investigated and repaired as one system.

Bathroom plumbing

Toilets, lavatories, showers, and tubs share supply and drain systems. We diagnose bathroom failures and close the case correctly.

Shower valve installation & replacement

Failed shower valves cause leaks, scald risk, and no control. We replace cartridges or full valves behind the wall when needed.

Tub / shower plumbing

Tub and shower supply, drains, overflows, and valves form one case file when leaks or performance problems appear.

Laundry plumbing

Washer boxes, standpipes, and laundry supply lines fail in ways that flood quickly. We investigate and correct laundry plumbing.

Laundry boxes & drain pans

Outdated laundry boxes and missing drain pans leave washers unprotected. We install or replace them for safer laundry setups.

Utility-sink installation

Utility sinks need proper supply, trap, and drain routing. We install them for garages, basements, and laundry rooms.

Dishwasher installation & plumbing

Dishwashers need correct supply, drain high-loop or air gap, and leak-free connections. We handle the plumbing side of the install.

Garbage disposal installation & replacement

Humming, leaking, or seized disposals are replaced and wired into the drain assembly correctly.

Angle-stop replacement

Under-sink and toilet shutoffs that drip or seize are replaced so you can isolate fixtures without drama.

Fixture supply-line replacement

Aged braided or soft-copper supply lines fail without much warning. We replace them before or after they leak.

Drain repair & replacement

Failed traps, corroded drain arms, and broken waste lines are repaired or replaced so fixtures drain without leaks.

Drain cleaning

Slow drains and backups leave clues. We clear the line and investigate what keeps returning after a temporary fix.

Sewer / drain camera inspections

When the cause is underground or inside the line, a camera inspection shows the evidence — offsets, roots, scale, or collapse.

Hydro jetting

Grease, scale, and heavy buildup often need high-pressure water jetting beyond a standard cable clear.

Waste and vent piping

Improper waste or vent piping causes slow drains, gurgling, and sewer odors. We correct the drainage and venting path.

Plumbing vent alterations

Roof vent moves, island vents, and remodel-driven vent changes must be designed so the drainage system still breathes correctly.

Plumbing remodels

Full plumbing remodels need rough-in planning, fixture coordination, and finishes that close cleanly. We handle the plumbing file end to end.

Kitchen remodel plumbing

Island sinks, dishwasher moves, pot fillers, and new layouts need kitchen remodel plumbing planned before cabinets close.

Bathroom remodel plumbing

Moved toilets, new showers, and double vanities require bathroom remodel plumbing that is laid out and finished correctly.

Natural-gas line installation & repair

New gas runs and repairs to existing lines are sized, routed, and tested to meet the load and the jurisdiction’s requirements.

Gas appliance connections

Water heaters, dryers, ranges, and other gas appliances need correct connectors, shutoffs, and leak-tested connections.

Cooktop / range gas connections

Cooktops and ranges need properly sized gas supply, shutoff access, and a clean connection inside the cabinet or behind the unit.

Hydronic heating plumbing

Boilers and hydronic loops depend on correct piping, pumps, and valves. We investigate and repair the plumbing side of hydronic heat.

Radiant-floor heating plumbing

Radiant manifolds, loops, and supply piping need careful diagnosis when floors stay cold or loops leak.

Boiler-related plumbing

Near-boiler piping, feeds, relief valves, and closely related connections are investigated when the hydronic plant misbehaves.

Backflow / DCVA installation & replacement

Backflow preventers and DCVAs protect the potable supply. We install, replace, and support testing requirements for these devices.

Plumbing inspections & troubleshooting

When something feels wrong but the cause is unclear, we inspect the system, gather evidence, and explain what we find.

Permit-related plumbing work

When permits and inspections are part of the job, we complete the plumbing scope so the work is ready for the inspector.

Tell us what you are seeing

If the problem does not match anything on this rail, it is still a case we can open.